Isuzu 700P 3.5tons 4tons fire fighting truck with a tank capacity of 3.55 tons, Isuzu 190 horsepower and 205 horsepower engines, high horsepower and strong power, CB20.10/15.30 medium and low pressure fire pump with a lift of up to 200 meters, PS/50W fire cannon with a range of more than 55m, suitable for urban high-rise residential fire rescue, forest fire suppression, etc
Isuzu 3.5 tons 4tons fire fighting truck chassis model QL1110ANKAY, engine model: 4HK1-TCG60, wheelbase: 3815, double row cab, 3+3 people. Shanghai Rongshen CB10/40 atmospheric pressure fire pump, rear of pump room, Chengdu West PS40 fire monitor. All pipeline materials should be made of stainless steel. The pump room is equipped with a hand lift pump trailer (hand pump dimensions: 700mm × 620mam × 730mm), a ≥ 10 inch visual reversing monitor, a reversing radar and a 360 ° panoramic high-definition driving recorder (memory ≥ 128G) function, the equipment box door is not closed, there is an indicator light in the cab, a Chinese control panel, with red warning lights, full red flashing lights, vehicle fire red, and equipment standard. (4 suction pipes of 125 * 2 meters), vehicle size (m): 6980X2250 × 3100, total mass: 9900kgs
Isuzu 3.5tons 4tons fire fighting truck cab structure: flat head, double row seat, four door passenger compartment.
Seating arrangement: 3 people in the front row+3 people in the back row (including the driver)
Cab structure: Install a hydraulic flipping mechanism that is suitable for tipping.
Equipment in the cab: In addition to the commonly used equipment in the original vehicle, the cab is equipped with a power take-off control switch, a 100W alarm, a warning light switch, etc
Isuzu fire fighting truck water tanker capacity: 3.5 tons 4 tons
Tank material:
Water tank: High quality steel plate (optional 304 stainless steel material), treated with anti-corrosion treatment
Structure: 4mm carbon steel plate for water tank bottom plate, 3mm carbon steel plate for water tank side plate and sealing plate, 3mm carbon steel patterned plate for water tank top plate; Welded steel plate with internal anti sway plate.
Equipment:
1 manhole with quick locking and opening device/1 liquid level indicator/1 drain outlet, equipped with stainless steel ball valve, manually controlled/4 injection ports (two on each side)/1 overflow device/1 breathing valve port
Isuzu 3.5tons 4tons water tank fire truck fire pump and pipeline
Model: CB10/30 atmospheric pressure fire pump, flow rate: 30L/s, pressure: 1.0Mpa
Maximum suction depth: 7m
Water intake time: ≤ 35s
Vacuum pump form: piston type, installation form: rear mounted, tank body pipeline material is high-quality seamless steel pipe, connected to various components through flanges. Tank outlet pipeline: There is one DN100 tank outlet pipeline, and water enters the fire pump from the tank body. It is equipped with one DN100 tank outlet pipeline
Manual butterfly valve, connected to water tank and fire pump through DN100 flexible joint.
External water inlet pipeline: There is an external water inlet at the rear of the fire pump, which is connected to an external 100 suction pipe and an internal buckle type pipe joint,
Water outlet pipeline: There is one DN65 atmospheric water outlet on each side of the fire pump, and one DN65 cannon pipeline, using DN65 flexible joints and controlled by DN65 cannon ball valves.
Water injection pipeline: one DN65 external water injection port on each side (with an internal buckle pipe tooth interface), and one DN65 tank water injection pipeline, which can be directly injected into the tank through a fire pump.
Residual water discharge pipeline: To protect the water pump and various ball valves, a residual water discharge valve is installed at the lowest point of the pipeline.
Cooling water pipeline: In order to enable the power take-off to cope with various complex situations during operation, it is equipped with cooling water pipeline and stainless steel ball valve.
Isuzu 3.5tons 4 tons fire fighting truck power take-off
Type: sandwich type (full power), operation: solenoid valve control (electric operation)
Cooling method: forced adjustable water cooling, lubrication method: splash oil lubrication
Fire monitor model: PS8/30, flow rate: 30L/s, range: ≥ 60m, pressure: 0.8MPa
Rotation angle: 360 ° horizontal, -45 °~70 ° pitch
Isuzu 3.5tons 4 tons water tank fire truck pump room material: high-quality steel frame; The mask is a bonded structure of alumina alloy patterned plate.
Structure: All steel frame welded structure, aluminum alloy rolling shutter doors are installed on the left and right rear sides of the pump room, which are lightweight, reliable, and have low noise.
The electrical system of the Isuzu 3.5tons 4tons water tank fire truck is equipped with luxurious red LED warning lights on the top of the cab.
Install one 50W LED fire searchlight on the top of the rear of the vehicle, which can automatically rotate 360 degrees. Install a foldable ladder at the rear of the vehicle.
There are two sets of red and blue flashing lights on each side of the vehicle, and safety sign lights and side reflectors (combination type) are installed below. It is equipped with front and rear clearance lights, and one turn signal light on each side. Lighting fixtures are installed in the passenger compartment, equipment box, and pump room, and comply with GB4785 regulations.
The power of the alarm is 100W; the alarm, warning light, and flashing light circuits are independent additional circuits, and the control components are installed in the cab. Additional instruments and switches are centrally arranged on the control panel for easy operation. The dashboard is equipped with pressure gauges, liquid level gauges, power main switches, and equipment box light switches.