Telescopic crane mouned on 10 wheeler truck , crane cpacity 8-14tons
knuckle boom crane mounted on truck
We are professional manufacturers to do the special vehicles .
We are supply all brands of special truck , north benz(beiben) , Faw , Foton , Shaanxi ,Sinotruck , Jac , Jmc , Isuzu ,Dongfeng all available .
The drive type could be 4x2 , 4x4 , 6x2 , 6x4 , 6x6 , 8x4
We can provide LHD (left hand drive) or RHD (right hand drive) vehicles
1 telescopic boom or knuckle boom all available
2 crane brand :CLW,XCMG ,UNIC, SANY or others
3 Crane capacity : 2 ton ,3.2 ton ,4 ton ,5 ton ,6.3 ton ,7 ton ,8 ton ,10 ton ,12 ton ,14 ton ,16 ton ,20 ton ,25 ton ,30 ton ,40 ton ,60 ton ,70 ton ,80 ton ,100 ton ,120 ton ,150 ton etc
1: The cargo cannot exceed the height of the boom. When the car is running, the lower part of the boom of the telescopic crane is horizontally between the cab and the carriage of the car, and the boom is placed vertically above the carriage [the cargo cannot exceed the height of the boom].
2: The working radius of the telescopic boom truck crane is wider. Under the same arm length, the telescopic boom truck mounted crane can also expand the working depth by placing a long wire hook, while the folding arm truck mounted crane has more requirements. Deep work is not easy to accomplish.
3: The telescopic arm is easier to control the vertical take-off and landing. The telescopic arm simply adopts the retractable lifting mechanism of the wire rope, which can strictly control the lifting and landing of the hanging object, while the folding arm adopts the hydraulic cylinder, which is difficult to control the vertical lifting of the lifting object. drop.
4: The operation of the telescopic arm truck-mounted crane is relatively simple. The telescopic arm truck-mounted crane adopts a lifting mechanism that retracts and unwinds the steel wire, and the operation is relatively simple, while the folding arm truck-mounted crane is more difficult to complete the action similar to the manipulator with multiple hydraulic cylinders. operate.
5: The telescopic arm is easier to install on the chassis of the whole vehicle: the telescopic arm is relatively loose in structure, which is conducive to the dispersion of the load of the whole vehicle, and the center of gravity is far away from the installation position, especially when lifting heavy objects, it is more conducive to dispersing the chassis shaft load.
6: The truck-mounted crane using the folding arm, whether it is in the middle or in the rear, because its structure is relatively concentrated, the center of gravity is easily concentrated on a certain axis of the chassis, and often a certain bridge generates a large load, which is not conducive to the whole vehicle installation